Copyright © 2021 Fienza® | All Rights Reserved.
* Patent pending. Product may differ slightly in appearance to images shown.

Frequently Asked Questions

Product & Installation

How does it work?

InvisiCab® is designed to fit within the timber stud wall at the time of construction or renovation of your bathroom. When installed inside the timber frame, the wall is then waterproofed and tiled to give a sleek ‘invisible’ look for your storage cabinet.

Which cabinet size do I need?

This depends on how much storage space you would like for your shower or bath. There are two cabinet sizes available to suit common tile sizes: 300 x 300 mm or 600 x 300 mm. The tile simply drops into the front of the door frame.

If you are using decorative, mosaic or other tile sizes, then tile cutting may be required. Talk to your tiler or tile supplier at the time of renovation or construction for advice.

Will InvisiCab® fit inside my wall?

InvisiCab® is designed to fit the most common timber stud wall framing at a depth of 90mm. InvisiCab® may also fit a 70mm deep timber frame if there is sufficient space behind for the 90mm deep cabinet to fit.

If unsure, consult your licensed builder for advice.

Do I need a licensed builder to install my InvisiCab®?

Yes. It is recommended that the builder follows the installation instructions enclosed with the product.

Can I retrofit an InvisiCab®?

No. Installation of InvisiCab® requires the removal of existing tile work and access to the timber stud wall for installation.

Warranty &
Returns

What is your warranty & returns policy?

We want you to be totally satisfied with our products and services.

There may be times when you will need to return a product purchased from one of our retailers. Our Warranties & Returns Policy is designed to assist you with your return.

Please read Warranties & Returns if you have any questions or are unhappy with your purchase.

If I have a problem with my InvisiCab® who do I contact?

Please contact the Fienza Customer Service team on (07) 3490 6700 or use our contact form here.

Where can I buy InvisiCab®?

InvisiCab® is available at over 200 tile retailers throughout Australia. Find your nearest Retailer here.

Maintenance

How do I clean my InvisiCab®?

InvisiCab® features an internal polished mirror finish that is susceptible to scratches if not cared for properly. We recommend using a non-abrasive, specially formulated stainless steel cleaner and microfibre cloth to ensure a smooth, streak and scratch-free finish. Avoid the use of citrus-based cleaners or metal scourers as they will scratch and damage the polished mirror surface.

Please note that some residue may remain once the protective film is removed from the polished inner surface, and can be cleaned following the method above.

TOP